DSH Series Screw Conical details For Chemical,
The central screw and the outer ribbon are connected to the
cycloidal needle wheel reducer, and rotate at an identical
revolution, the central. In operation, screw lifts the material
from bottom to top. Mean while , the ribbon with a higher linear
velocity sprials to lift the material from bottom to top along the
The two kinds of motions make the material be thrown into the space
tangentially. And the material effects strong convection shearing
and diffusion, thus a quick mixing effect is achieved. (the screw
can also be made to a reverse one ).
1.Mixing Method: Standard Twin-screw cone mixer has two stirring spirals. According
to the requirements for production, you can choose single spiral (one long spiral), double
spirals (a long and a short asymmetrical spirals) and three spirals (two short and one long symmetrical spirals).
2. Cooling and Heating System: Can equip with outer jacket for heating or cooling. Usally use
water for cooling, steam/ thermal oil/ electric for heating.
3. Liquid-adding Mixing: Install liquid jet pipeline in the intermediate shaft of the
mixer, connect the atomizing nozzle, which can adding liquid into the mixer; By selecting a specific
material, you can add the acid and alkaline liquid material into the powder for mixing.
4. Conical twin screw with mixing machine mixing components for two asymmetrical
cantilever screw, they around its axis of rotation (rotation) and at the same time, also around the
conical container center shaft, with the help of a jib rotating in the cone surface of planetary motion (revolution).
5.The equipment through the revolution of the screw, rotation so materials again
and again, to produce shear in the cone, convection, diffusion, etc compound movement, so as to achieve